1. Click the Start menu and type “services” into the search box. 2. Select “Services” from search results. Windows automatically starts services such as IP Helper and Print Spooler upon startup, even when not needed. 3. Double-click on each service in the Services window and change its Startup Type to “Manual.”. Have a look at this step by step guide (as its too long to explain here) “How to install Windows 10 from USB with UEFI support: for your Aspire A315-54, then (after installation of Win-10) I would update your existing bios v1.04 dated 2019/09/02 (as there have been many updates on bios) on your A315-54 to the latest v1.09 dated 2020/05/19 On the BIOS change from AHCI to another option and also disable the D2D Recovery option, then try to install Windows 8.1 and from there upgrade the BIOS. With the BIOS upgraded I think you will Follow the steps below to download the Windows 11 drivers you need. 1. Go to your web browser and enter www.acer.com in the search bar. 2. On the Acer website, go to the top menu and hoover over . A submenu appears. 3. In the submenu, click on Drivers and Manuals. Drivers and Manuals page, enter your device serial number in the search field Cannot lock current drive. Windows cannot run disk checking on this volume because it is write protected. Other random stuff I tried. Using the USB 2.0 port to install Windows. Some posts mentioned the 3.0 port may not have drivers installed. This didn't make any difference. Installing Windows-To-Go on a 32 GB USB flash drive. Hi, That's fine, you can download iso from Microsoft and create a bootable installation media(USB), remove the HDD and install the new M.2 SSD, insert the bootable USB you have creared, go to BIOS screen and move to Boot tab, use F6 button to bring bootable USB disk to first boot device position, press F10 to save the settings and exit BIOS, when the laptop reboots it will start the m0v2I. enter BIOS at boot pressing F2. check if your HDD is listed on main tab or under bootable devices. I'm not an Acer employee. nancy0608 Member Posts: 6. June 2017. Thanks for your reply. This is what i found in 2 different times, following eachother, entering BIOS: Info page: Hdd model number: listed. Turn the laptop off, insert the battery and connect the AC adapter. Insert the USB Memory Stick into one of the USB port of the Aspire laptop. Press Fn+Esc, keep it pressed and press the power button to turn the laptop on. Release Fn+Esc after a few seconds, the power button will be blinking. Press the power button once. January 2020 Answer . As I told you before, you can install the microsoft iso. To do this, simply delete the emmc partitions and install windows again. The problem is that this procedure will erase erecovery, which for some reason has been damaged. click here to find the serial number or partnumber of your model! 01 Feb 2018 #2. Nope, not a chance. To have your own recovery partition, all you need to do is do a fresh install of Windows. You can use a recovery disk however, it's going to be paid regardless if it's a physical copy or a soft copy. My Computer. Choose the one corresponding to your issue (e.g., Internet Connections, Hardware and Devices, Windows Update, etc.). * If you don't see your issue, click Other Troubleshooters for an extensive list. How to replace RAM memory in laptop Acer Aspire One ZG5Answers for most popular questions:

how to install windows 10 on acer aspire one